It is quite common to notice cracks in drywall and masonry during the first few years of a new home. Most of these occurrences are simply the result of materials drying, expanding, and contracting as the house acclimates to its environment, and they rarely signal a structural problem.
There are three main reasons these cracks appear:
- Drying Shrinkage: This is the most frequent cause. As lumber and drywall compound lose moisture and cure, hairline separations naturally form at seams, corners, and door frames.
- Thermal Expansion and Contraction: Seasonal temperature changes cause framing, drywall, and masonry to expand in the summer and shrink in the winter, which pulls at the joints.
- Minor Foundation Settlement: As the soil beneath your new home compresses slightly under the weight of the structure, minor movement can occur. This typically results in cosmetic hairline fissures or nail pops.
While some movement is a normal part of new construction—especially in the expansive clay soils common in the Centennial area—certain patterns warrant a closer look. You should monitor for stair-step cracks in brick or block veneer that follow mortar joints in a zigzag pattern, or cracks that exceed 1/4 inch in width. If you notice these alongside sticking doors or uneven floors, the underlying movement may be structural rather than cosmetic.
We recommend documenting any new cracks with photos and monitoring them for at least two seasons. If you notice cracks widening or moving progressively, we can provide a thorough assessment to determine if deeper stabilization is needed. Let us help you get your project started by scheduling a consultation to evaluate your home’s specific conditions.
Please consult a licensed contractor for definitive advice; verify licensure with the Colorado Department of Regulatory Agencies (DORA). Project outcomes and timelines may vary based on site conditions.
Related FAQs
-
Why does the Price per Helical Pier Vary Based on Installation Depth and Soil Conditions?
Read More »: Why does the Price per Helical Pier Vary Based on Installation Depth and Soil Conditions?The price per helical pier varies because soil conditions and installation depth directly dictate the amount of material, labor, and equipment required for a stable foundation. In the Centennial and Denver metro areas, these two factors are the primary cost…
-
Should I Expect a Higher Labor Cost for the Installation of Helical Piers Compared to Push Piers?
Read More »: Should I Expect a Higher Labor Cost for the Installation of Helical Piers Compared to Push Piers?No, you should generally expect lower labor costs for the installation of helical piers compared to push piers. According to the provided guide, labor costs are a significant variable in foundation repair pricing, and they differ based on the following…
-
Can a Contractor Provide an Accurate Cost Estimate for Push Versus Helical Piers without a Soil Analysis?
Read More »: Can a Contractor Provide an Accurate Cost Estimate for Push Versus Helical Piers without a Soil Analysis?No, a contractor cannot provide a finalized or precise cost estimate without considering soil conditions, which typically require a technical analysis. According to the provided content, a geotechnical analysis or soil testing is considered essential for several reasons: Determining Load…
-
Why are Helical Piers Sometimes More Expensive to Install than Push Piers?
Read More »: Why are Helical Piers Sometimes More Expensive to Install than Push Piers?While helical piers are often more affordable for lighter loads, several factors can make them more expensive than push piers depending on the specific project requirements. Key reasons why helical piers may involve a higher investment include: Manufacturing Complexity: Helical…
-
What Factors besides Pier Type Influence the Total Cost of Foundation Stabilization?
Read More »: What Factors besides Pier Type Influence the Total Cost of Foundation Stabilization?Beyond the specific type of pier selected, several environmental, structural, and logistical factors significantly influence the total cost of foundation stabilization in Colorado: Soil Conditions and Geology: The presence of expansive clay soils, which swell and shrink with moisture levels,…
