It is quite common to notice cracks in drywall and masonry during the first few years of a new home. Most of these occurrences are simply the result of materials drying, expanding, and contracting as the house acclimates to its environment, and they rarely signal a structural problem.
There are three main reasons these cracks appear:
- Drying Shrinkage: This is the most frequent cause. As lumber and drywall compound lose moisture and cure, hairline separations naturally form at seams, corners, and door frames.
- Thermal Expansion and Contraction: Seasonal temperature changes cause framing, drywall, and masonry to expand in the summer and shrink in the winter, which pulls at the joints.
- Minor Foundation Settlement: As the soil beneath your new home compresses slightly under the weight of the structure, minor movement can occur. This typically results in cosmetic hairline fissures or nail pops.
While some movement is a normal part of new construction—especially in the expansive clay soils common in the Centennial area—certain patterns warrant a closer look. You should monitor for stair-step cracks in brick or block veneer that follow mortar joints in a zigzag pattern, or cracks that exceed 1/4 inch in width. If you notice these alongside sticking doors or uneven floors, the underlying movement may be structural rather than cosmetic.
We recommend documenting any new cracks with photos and monitoring them for at least two seasons. If you notice cracks widening or moving progressively, we can provide a thorough assessment to determine if deeper stabilization is needed. Let us help you get your project started by scheduling a consultation to evaluate your home’s specific conditions.
Please consult a licensed contractor for definitive advice; verify licensure with the Colorado Department of Regulatory Agencies (DORA). Project outcomes and timelines may vary based on site conditions.
Related FAQs
-
Why is it Necessary to Consult a Structural Engineer for Helical Pier Load Capacity Calculations?
Read More »: Why is it Necessary to Consult a Structural Engineer for Helical Pier Load Capacity Calculations?Consulting a licensed structural engineer is necessary for helical pier load capacity calculations because they are the only professionals qualified to translate soil data and architectural requirements into a safe, code-compliant foundation design. Key reasons for their involvement include: Interpretation…
-
How does Soil Condition Affect Helical Pier Load Capacity Calculations?
Read More »: How does Soil Condition Affect Helical Pier Load Capacity Calculations?Soil conditions are a decisive factor in helical pier load capacity calculations because they determine how the ground resists structural weight. Soil data informs the design, placement, and required depth of the piers to ensure long-term stability. Key ways soil…
-
Does the Estimated Price per Helical Pier Include Labor, Excavation, and Permit Fees?
Read More »: Does the Estimated Price per Helical Pier Include Labor, Excavation, and Permit Fees?Yes, the estimated price per helical pier provided by ACN Construction is a comprehensive figure that includes the following components: Labor: This covers the entire installation crew, equipment operators, and supervision by a project manager. Excavation: Minimal digging required for…
-
Are Helical Piers More Expensive than Traditional Concrete Footers when Considering Total Project Costs?
Read More »: Are Helical Piers More Expensive than Traditional Concrete Footers when Considering Total Project Costs?When evaluating total project costs, helical piers can actually be more economical than traditional concrete footers, even though their upfront per-unit price is higher. While a single helical pier costs between $150 and $400 compared to $100 to $250 for…
-
What is the Average Cost per Helical Pier for Residential Foundation Repair?
Read More »: What is the Average Cost per Helical Pier for Residential Foundation Repair?The cost of helical piers for residential foundation repair in the Denver metro area, including Centennial, typically ranges from $150 to $400 per pier. This price generally includes both materials (high-quality steel piers with brackets and fasteners) and labor. Several…
