No, sticking doors and windows do not always indicate a significant problem. In a newly built home, some sticking is considered a normal part of the initial settling process as the structure acclimates to its environment, particularly during the first 12 months.
In our experience here in Colorado, this is often caused by seasonal expansion and contraction. For example, a door might stick during a wet spring due to moisture but swing freely again by late summer. Minor issues that can be resolved by adjusting a strike plate or planing the door are typically within normal construction tolerances.
However, you should be concerned if the sticking becomes permanent, progressively worsens over several months, or is accompanied by other red flags, such as:
- Stair-step cracks in masonry or brick veneer that radiate from the corners of the door or window frame.
- Changing gaps around the frames, such as a gap that is widening at the top while narrowing at the bottom.
- Cracks exceeding 1/4 inch in width, which are generally considered structurally significant.
Because Centennial and the Denver area have expansive clay soils and harsh freeze-thaw cycles, homes in our region can experience more pronounced movement. If you notice these progressive signs, it is important to have a professional evaluation to determine if the movement is harmless or requires stabilization.
Let us help you get your project started. If you are concerned about your home’s foundation, please contact us for a site evaluation and a custom quote.
Please consult a licensed contractor for definitive advice; verify licensure with the Colorado Department of Regulatory Agencies (DORA). Estimates are preliminary and subject to change after site inspection and a full scope review.
Related FAQs
-
How does the Cost of Push Piers Compare to Helical Piers for Foundation Repair?
Read More »: How does the Cost of Push Piers Compare to Helical Piers for Foundation Repair?When comparing foundation repair options, push piers generally require a higher upfront investment than helical piers due to differences in equipment, depth, and material requirements. ### Cost Comparison Breakdown Push Piers: These typically cost between $150 and $250 per linear…
-
Why might a Contractor Recommend a More Expensive Helical Pier over a Push Pier?
Read More »: Why might a Contractor Recommend a More Expensive Helical Pier over a Push Pier?While push piers are generally the more expensive option for heavy commercial loads, specific project conditions can make a helical pier a more costly or recommended choice depending on the manufacturing and site requirements. A contractor might recommend a helical…
-
Are Push Piers or Helical Piers Generally Cheaper for Residential Foundation Repair?
Read More »: Are Push Piers or Helical Piers Generally Cheaper for Residential Foundation Repair?In residential foundation repair, helical piers are generally more affordable than push piers, though the final cost depends on the specific project requirements and soil conditions. Helical Piers are often the more cost-effective choice for residential structures because: Lower Installation…
-
Is the Cost of Foundation Pier Installation Influenced by Soil Conditions in Colorado?
Read More »: Is the Cost of Foundation Pier Installation Influenced by Soil Conditions in Colorado?Yes, soil conditions in Colorado significantly influence the cost and selection of foundation pier installation. The state’s unique geology, particularly in areas like Centennial and the Front Range, presents specific challenges that dictate project budgets. Key ways soil conditions affect…
-
How do I Start Planning a Home Addition in Colorado?
Read More »: How do I Start Planning a Home Addition in Colorado?Planning a home addition in Colorado requires a structured approach that balances design, local regulations, and construction logistics. To start the process effectively, follow these essential steps: Define Your Goals and Scope: Determine the purpose of your addition (e.g., a…
