No, sticking doors and windows do not always indicate a significant problem. In a newly built home, some sticking is considered a normal part of the initial settling process as the structure acclimates to its environment, particularly during the first 12 months.
In our experience here in Colorado, this is often caused by seasonal expansion and contraction. For example, a door might stick during a wet spring due to moisture but swing freely again by late summer. Minor issues that can be resolved by adjusting a strike plate or planing the door are typically within normal construction tolerances.
However, you should be concerned if the sticking becomes permanent, progressively worsens over several months, or is accompanied by other red flags, such as:
- Stair-step cracks in masonry or brick veneer that radiate from the corners of the door or window frame.
- Changing gaps around the frames, such as a gap that is widening at the top while narrowing at the bottom.
- Cracks exceeding 1/4 inch in width, which are generally considered structurally significant.
Because Centennial and the Denver area have expansive clay soils and harsh freeze-thaw cycles, homes in our region can experience more pronounced movement. If you notice these progressive signs, it is important to have a professional evaluation to determine if the movement is harmless or requires stabilization.
Let us help you get your project started. If you are concerned about your home’s foundation, please contact us for a site evaluation and a custom quote.
Please consult a licensed contractor for definitive advice; verify licensure with the Colorado Department of Regulatory Agencies (DORA). Estimates are preliminary and subject to change after site inspection and a full scope review.
Related FAQs
-
How does the Expense of Installing Helical Piers Compare to Other Foundation Repair Methods?
Read More »: How does the Expense of Installing Helical Piers Compare to Other Foundation Repair Methods?When evaluating foundation repair, helical piers typically have a higher upfront cost per unit compared to other methods, but they offer specific performance and installation advantages. The cost for helical piers generally ranges from $2,000 to $5,000 per pier. Here…
-
How does the Required Installation Depth Affect the Total Cost per Helical Pier?
Read More »: How does the Required Installation Depth Affect the Total Cost per Helical Pier?The required installation depth is a primary factor in determining the total cost of a helical pier because the price is directly tied to the amount of material and labor used. According to ACN Construction, depth affects the cost in…
-
Why do Contractors Often Charge per Helical Pier Location Rather than per Individual Pier?
Read More »: Why do Contractors Often Charge per Helical Pier Location Rather than per Individual Pier?Contractors utilize a per-location pricing model for helical piers because it accurately reflects the specific labor, engineering, and material requirements of each individual support point. This approach is considered an industry best practice for foundation stabilization for several reasons: Independent…
-
How Much does a Typical Helical Pier Installation Cost per Pier Location?
Read More »: How Much does a Typical Helical Pier Installation Cost per Pier Location?The typical cost for a helical pier installation generally ranges between $1,500 and $5,000 per pier location, depending on the specific requirements of the project. Based on ACN Construction’s data and regional comparisons, here is a breakdown of the cost…
-
Are There Hidden Costs when Choosing a Helical Pier Estimate with a Depth Clause?
Read More »: Are There Hidden Costs when Choosing a Helical Pier Estimate with a Depth Clause?Yes, choosing a helical pier estimate with a depth clause can lead to additional costs beyond the initial quote. A depth clause is a standard contract provision that allows for price adjustments if piers must be installed deeper than originally…
