No, sticking doors and windows do not always indicate a significant problem. In a newly built home, some sticking is considered a normal part of the initial settling process as the structure acclimates to its environment, particularly during the first 12 months.
In our experience here in Colorado, this is often caused by seasonal expansion and contraction. For example, a door might stick during a wet spring due to moisture but swing freely again by late summer. Minor issues that can be resolved by adjusting a strike plate or planing the door are typically within normal construction tolerances.
However, you should be concerned if the sticking becomes permanent, progressively worsens over several months, or is accompanied by other red flags, such as:
- Stair-step cracks in masonry or brick veneer that radiate from the corners of the door or window frame.
- Changing gaps around the frames, such as a gap that is widening at the top while narrowing at the bottom.
- Cracks exceeding 1/4 inch in width, which are generally considered structurally significant.
Because Centennial and the Denver area have expansive clay soils and harsh freeze-thaw cycles, homes in our region can experience more pronounced movement. If you notice these progressive signs, it is important to have a professional evaluation to determine if the movement is harmless or requires stabilization.
Let us help you get your project started. If you are concerned about your home’s foundation, please contact us for a site evaluation and a custom quote.
Please consult a licensed contractor for definitive advice; verify licensure with the Colorado Department of Regulatory Agencies (DORA). Estimates are preliminary and subject to change after site inspection and a full scope review.
Related FAQs
-
What Factors besides Material Costs Influence the Final Price of a Helical Pier Project?
Read More »: What Factors besides Material Costs Influence the Final Price of a Helical Pier Project?The final price of a helical pier project is influenced by several factors beyond basic material costs, primarily driven by site-specific conditions and logistical requirements. According to ACN Construction, these variables include: Related FAQs
-
What Factors Cause Helical Pier Installation to be More Expensive than Push Piers?
Read More »: What Factors Cause Helical Pier Installation to be More Expensive than Push Piers?Based on the provided content, helical pier installation can be more expensive than push piers due to several specific factors regarding materials, manufacturing, and specialized requirements: Manufacturing Complexity: Helical piers have a higher per-unit cost because the fabrication process is…
-
How does the Structure’s Weight Impact the Cost Difference between Push and Helical Piers?
Read More »: How does the Structure’s Weight Impact the Cost Difference between Push and Helical Piers?The weight of a structure significantly impacts the choice and cost of a piering system because different systems are engineered for specific load capacities. Generally, the heavier the structure, the more likely push piers will be required, despite their higher…
-
What Factors besides Material Costs Influence the Price per Helical Pier?
Read More »: What Factors besides Material Costs Influence the Price per Helical Pier?While material costs are a significant factor, the total price per helical pier is influenced by several logistical, environmental, and technical variables. Beyond the steel itself, the following factors determine the final cost: Soil Conditions: The type of soil (such…
-
Are There Additional Fees for Permits and Engineering Included in the Cost per Helical Pier?
Read More »: Are There Additional Fees for Permits and Engineering Included in the Cost per Helical Pier?In most cases, permits and engineering fees are not bundled into the base material and labor cost per pier. Instead, they are treated as separate line items. According to ACN Construction, it is important to understand how these costs are…
