No, sticking doors and windows do not always indicate a significant problem. In a newly built home, some sticking is considered a normal part of the initial settling process as the structure acclimates to its environment, particularly during the first 12 months.
In our experience here in Colorado, this is often caused by seasonal expansion and contraction. For example, a door might stick during a wet spring due to moisture but swing freely again by late summer. Minor issues that can be resolved by adjusting a strike plate or planing the door are typically within normal construction tolerances.
However, you should be concerned if the sticking becomes permanent, progressively worsens over several months, or is accompanied by other red flags, such as:
- Stair-step cracks in masonry or brick veneer that radiate from the corners of the door or window frame.
- Changing gaps around the frames, such as a gap that is widening at the top while narrowing at the bottom.
- Cracks exceeding 1/4 inch in width, which are generally considered structurally significant.
Because Centennial and the Denver area have expansive clay soils and harsh freeze-thaw cycles, homes in our region can experience more pronounced movement. If you notice these progressive signs, it is important to have a professional evaluation to determine if the movement is harmless or requires stabilization.
Let us help you get your project started. If you are concerned about your home’s foundation, please contact us for a site evaluation and a custom quote.
Please consult a licensed contractor for definitive advice; verify licensure with the Colorado Department of Regulatory Agencies (DORA). Estimates are preliminary and subject to change after site inspection and a full scope review.
Related FAQs
-
Which Colorado Jurisdictions are Required to Adopt the Mlecc by 2026?
Read More »: Which Colorado Jurisdictions are Required to Adopt the Mlecc by 2026?Based on the provided guide, several Colorado jurisdictions are scheduled to adopt or implement the Model Low Energy and Carbon Code (MLECC) by 2026. While the code establishes a statewide baseline, local adoption timelines vary. The specific jurisdictions required to…
-
What is the Colorado Model Low Energy and Carbon Code?
Read More »: What is the Colorado Model Low Energy and Carbon Code?The Model Low Energy and Carbon Code (MLECC) is an enhanced energy standard in Colorado designed to push building efficiency beyond baseline requirements. It serves as a framework for low-energy and low-carbon construction in both new homes and major renovation…
-
Does my Home Remodel in Denver Need to Comply with the 2026 Mlecc?
Read More »: Does my Home Remodel in Denver Need to Comply with the 2026 Mlecc?Yes, if you are planning a major renovation or remodel in Denver, your project will need to comply with the Model Low Energy and Carbon Code (MLECC). Denver has adopted the MLECC with a timeline that makes these standards mandatory…
-
What are the Insulation and Air Sealing Standards in the New Colorado Energy Code?
Read More »: What are the Insulation and Air Sealing Standards in the New Colorado Energy Code?The New Colorado Model Low Energy and Carbon Code (MLECC) establishes rigorous performance benchmarks for building envelopes, focusing on high-performance insulation and enhanced air sealing to move homes toward net-zero energy readiness. Insulation Standards Insulation requirements vary by jurisdiction, with…
-
How does the Mlecc Affect Residential Window Requirements after July 1, 2026?
Read More »: How does the Mlecc Affect Residential Window Requirements after July 1, 2026?Starting July 1, 2026, the Model Low Energy and Carbon Code (MLECC) significantly tightens window performance standards for residential projects across most Colorado jurisdictions. These updates focus on specific efficiency metrics to reduce carbon emissions and heat transfer. Key requirements…
