It is quite common to notice cracks in drywall and masonry during the first few years of a new home. Most of these occurrences are simply the result of materials drying, expanding, and contracting as the house acclimates to its environment, and they rarely signal a structural problem.
There are three main reasons these cracks appear:
- Drying Shrinkage: This is the most frequent cause. As lumber and drywall compound lose moisture and cure, hairline separations naturally form at seams, corners, and door frames.
- Thermal Expansion and Contraction: Seasonal temperature changes cause framing, drywall, and masonry to expand in the summer and shrink in the winter, which pulls at the joints.
- Minor Foundation Settlement: As the soil beneath your new home compresses slightly under the weight of the structure, minor movement can occur. This typically results in cosmetic hairline fissures or nail pops.
While some movement is a normal part of new construction—especially in the expansive clay soils common in the Centennial area—certain patterns warrant a closer look. You should monitor for stair-step cracks in brick or block veneer that follow mortar joints in a zigzag pattern, or cracks that exceed 1/4 inch in width. If you notice these alongside sticking doors or uneven floors, the underlying movement may be structural rather than cosmetic.
We recommend documenting any new cracks with photos and monitoring them for at least two seasons. If you notice cracks widening or moving progressively, we can provide a thorough assessment to determine if deeper stabilization is needed. Let us help you get your project started by scheduling a consultation to evaluate your home’s specific conditions.
Please consult a licensed contractor for definitive advice; verify licensure with the Colorado Department of Regulatory Agencies (DORA). Project outcomes and timelines may vary based on site conditions.
Related FAQs
-
How Many Helical Piers are Typically Needed for a Standard Home Foundation Stabilization Project?
Read More »: How Many Helical Piers are Typically Needed for a Standard Home Foundation Stabilization Project?For a standard home foundation stabilization project, the number of helical piers required typically depends on the specific project type and the section of the foundation being supported. General estimates for residential projects in the Centennial and Denver areas include:…
-
Does the Type of Soil at my Property Impact the Cost Difference between Helical and Push Piers?
Read More »: Does the Type of Soil at my Property Impact the Cost Difference between Helical and Push Piers?Yes, the type of soil at your property is one of the most critical factors impacting both the choice and the cost difference between helical and push piers. Soil conditions influence the final price in the following ways: Suitability and…
-
How can I Tell if my Garage Door Needs a Simple Repair or a Full Replacement?
Read More »: How can I Tell if my Garage Door Needs a Simple Repair or a Full Replacement?Determining whether you need a simple repair or a full replacement involves evaluating the age, condition, and local environment of your garage door. Based on the provided guidelines for Centennial homeowners, consider the following factors: Door Lifespan: In Centennial’s moderate…
-
Why does the Price per Helical Pile Vary Based on Soil Conditions and Installation Depth?
Read More »: Why does the Price per Helical Pile Vary Based on Soil Conditions and Installation Depth?The price per helical pile varies based on soil conditions and installation depth because these factors directly dictate the amount of material, labor, and specialized equipment required to reach stable ground. Key reasons for these price variations include: Soil Profile…
-
Are Push Piers or Helical Piers More Cost-effective for Stabilizing a Lightweight Structure like a Porch or Garage?
Read More »: Are Push Piers or Helical Piers More Cost-effective for Stabilizing a Lightweight Structure like a Porch or Garage?For stabilizing lightweight structures such as porches, decks, or garages, helical piers are generally the more cost-effective option. This is due to several factors related to their design and installation: Lower Material Costs: Helical piers consist of steel shafts and…
