It is quite common to notice cracks in drywall and masonry during the first few years of a new home. Most of these occurrences are simply the result of materials drying, expanding, and contracting as the house acclimates to its environment, and they rarely signal a structural problem.
There are three main reasons these cracks appear:
- Drying Shrinkage: This is the most frequent cause. As lumber and drywall compound lose moisture and cure, hairline separations naturally form at seams, corners, and door frames.
- Thermal Expansion and Contraction: Seasonal temperature changes cause framing, drywall, and masonry to expand in the summer and shrink in the winter, which pulls at the joints.
- Minor Foundation Settlement: As the soil beneath your new home compresses slightly under the weight of the structure, minor movement can occur. This typically results in cosmetic hairline fissures or nail pops.
While some movement is a normal part of new construction—especially in the expansive clay soils common in the Centennial area—certain patterns warrant a closer look. You should monitor for stair-step cracks in brick or block veneer that follow mortar joints in a zigzag pattern, or cracks that exceed 1/4 inch in width. If you notice these alongside sticking doors or uneven floors, the underlying movement may be structural rather than cosmetic.
We recommend documenting any new cracks with photos and monitoring them for at least two seasons. If you notice cracks widening or moving progressively, we can provide a thorough assessment to determine if deeper stabilization is needed. Let us help you get your project started by scheduling a consultation to evaluate your home’s specific conditions.
Please consult a licensed contractor for definitive advice; verify licensure with the Colorado Department of Regulatory Agencies (DORA). Project outcomes and timelines may vary based on site conditions.
Related FAQs
-
Why do Contractors Often Charge per Pier Location Rather than Just for Materials?
Read More »: Why do Contractors Often Charge per Pier Location Rather than Just for Materials?Contractors utilize a per-pier location pricing model because it accurately reflects the specific labor, equipment, and engineering required at every individual support point. This method is considered an industry-best practice for several reasons: Independent Labor Requirements: Each pier location requires…
-
What is the Process for Cutting a Foundation for a New Window?
Read More »: What is the Process for Cutting a Foundation for a New Window?The process of cutting a foundation for a new egress window is a technically demanding task that requires specialized equipment and professional expertise. When you work with a professional team like ACN Construction, the following steps are taken: Site Preparation:…
-
How does the Cost of Helical Piers Compare to Push Piers for Residential Foundation Repair?
Read More »: How does the Cost of Helical Piers Compare to Push Piers for Residential Foundation Repair?When comparing foundation repair methods, helical piers are generally more cost-effective for standard residential projects than push piers. The total investment for each system is influenced by material costs, labor complexity, and the specific requirements of the structure. According to…
-
Can Lp Smartside Resist Hail and High Wind Damage?
Read More »: Can Lp Smartside Resist Hail and High Wind Damage?LP SmartSide is specifically engineered to resist damage from both high winds and severe hail, making it a premier choice for volatile climates like Colorado. ### Hail Resistance LP SmartSide provides industry-leading impact protection through several key features: UL 2218…
-
How do You Maintain New Sod after Installation in Arvada?
Read More »: How do You Maintain New Sod after Installation in Arvada?Maintaining new sod in Arvada is critical during the first few weeks to ensure successful root establishment in Colorado’s semi-arid climate. According to the provided guide, follow these essential maintenance steps: Initial Watering Schedule: For the first seven to ten…
