It is quite common to notice cracks in drywall and masonry during the first few years of a new home. Most of these occurrences are simply the result of materials drying, expanding, and contracting as the house acclimates to its environment, and they rarely signal a structural problem.
There are three main reasons these cracks appear:
- Drying Shrinkage: This is the most frequent cause. As lumber and drywall compound lose moisture and cure, hairline separations naturally form at seams, corners, and door frames.
- Thermal Expansion and Contraction: Seasonal temperature changes cause framing, drywall, and masonry to expand in the summer and shrink in the winter, which pulls at the joints.
- Minor Foundation Settlement: As the soil beneath your new home compresses slightly under the weight of the structure, minor movement can occur. This typically results in cosmetic hairline fissures or nail pops.
While some movement is a normal part of new construction—especially in the expansive clay soils common in the Centennial area—certain patterns warrant a closer look. You should monitor for stair-step cracks in brick or block veneer that follow mortar joints in a zigzag pattern, or cracks that exceed 1/4 inch in width. If you notice these alongside sticking doors or uneven floors, the underlying movement may be structural rather than cosmetic.
We recommend documenting any new cracks with photos and monitoring them for at least two seasons. If you notice cracks widening or moving progressively, we can provide a thorough assessment to determine if deeper stabilization is needed. Let us help you get your project started by scheduling a consultation to evaluate your home’s specific conditions.
Please consult a licensed contractor for definitive advice; verify licensure with the Colorado Department of Regulatory Agencies (DORA). Project outcomes and timelines may vary based on site conditions.
Related FAQs
-
How does Lp Smartside Compare to Traditional Wood Siding?
Read More »: How does Lp Smartside Compare to Traditional Wood Siding?When comparing LP SmartSide engineered wood siding to traditional wood siding, the primary differences lie in durability, maintenance requirements, and overall lifespan. While traditional wood is made from solid lumber, LP SmartSide is an engineered product composed of oriented strand…
-
What is the Average Cost of Fiberglass Window Installation?
Read More »: What is the Average Cost of Fiberglass Window Installation?Based on the provided content from ACN Construction, there is no specific dollar amount or numerical range listed for the average cost of fiberglass window installation. Instead, the guide emphasizes a transparent and personalized approach to pricing through the following…
-
Who Makes the Best Fiberglass Replacement Windows in 2026?
Read More »: Who Makes the Best Fiberglass Replacement Windows in 2026?Based on the evaluation of top window brands for 2026, several manufacturers are recognized for their high-performance fiberglass replacement windows. The best options are identified by their certified performance data, such as a U-factor of 0.30 or lower and a…
-
Do Fiberglass Windows Warp in Extreme Heat and Cold?
Read More »: Do Fiberglass Windows Warp in Extreme Heat and Cold?No, fiberglass windows do not warp in extreme heat and cold. They are engineered for exceptional dimensional stability, making them highly resistant to the warping, softening, or distortion that can affect other materials like vinyl or wood. This durability is…
-
How Long do Fiberglass Window Frames Last in Colorado Weather?
Read More »: How Long do Fiberglass Window Frames Last in Colorado Weather?In Colorado’s demanding climate, fiberglass window frames are a premier long-term investment due to their exceptional durability. According to ACN Construction, properly installed fiberglass windows can last between 30 to 50 years. Several factors contribute to this longevity despite Colorado’s…
