It is quite common to notice cracks in drywall and masonry during the first few years of a new home. Most of these occurrences are simply the result of materials drying, expanding, and contracting as the house acclimates to its environment, and they rarely signal a structural problem.
There are three main reasons these cracks appear:
- Drying Shrinkage: This is the most frequent cause. As lumber and drywall compound lose moisture and cure, hairline separations naturally form at seams, corners, and door frames.
- Thermal Expansion and Contraction: Seasonal temperature changes cause framing, drywall, and masonry to expand in the summer and shrink in the winter, which pulls at the joints.
- Minor Foundation Settlement: As the soil beneath your new home compresses slightly under the weight of the structure, minor movement can occur. This typically results in cosmetic hairline fissures or nail pops.
While some movement is a normal part of new construction—especially in the expansive clay soils common in the Centennial area—certain patterns warrant a closer look. You should monitor for stair-step cracks in brick or block veneer that follow mortar joints in a zigzag pattern, or cracks that exceed 1/4 inch in width. If you notice these alongside sticking doors or uneven floors, the underlying movement may be structural rather than cosmetic.
We recommend documenting any new cracks with photos and monitoring them for at least two seasons. If you notice cracks widening or moving progressively, we can provide a thorough assessment to determine if deeper stabilization is needed. Let us help you get your project started by scheduling a consultation to evaluate your home’s specific conditions.
Please consult a licensed contractor for definitive advice; verify licensure with the Colorado Department of Regulatory Agencies (DORA). Project outcomes and timelines may vary based on site conditions.
Related FAQs
-
How does the Expense of Installing Helical Piers Compare to Other Foundation Repair Methods?
Read More »: How does the Expense of Installing Helical Piers Compare to Other Foundation Repair Methods?When evaluating foundation repair, helical piers typically have a higher upfront cost per unit compared to other methods, but they offer specific performance and installation advantages. The cost for helical piers generally ranges from $2,000 to $5,000 per pier. Here…
-
How does the Required Installation Depth Affect the Total Cost per Helical Pier?
Read More »: How does the Required Installation Depth Affect the Total Cost per Helical Pier?The required installation depth is a primary factor in determining the total cost of a helical pier because the price is directly tied to the amount of material and labor used. According to ACN Construction, depth affects the cost in…
-
Why do Contractors Often Charge per Helical Pier Location Rather than per Individual Pier?
Read More »: Why do Contractors Often Charge per Helical Pier Location Rather than per Individual Pier?Contractors utilize a per-location pricing model for helical piers because it accurately reflects the specific labor, engineering, and material requirements of each individual support point. This approach is considered an industry best practice for foundation stabilization for several reasons: Independent…
-
How Much does a Typical Helical Pier Installation Cost per Pier Location?
Read More »: How Much does a Typical Helical Pier Installation Cost per Pier Location?The typical cost for a helical pier installation generally ranges between $1,500 and $5,000 per pier location, depending on the specific requirements of the project. Based on ACN Construction’s data and regional comparisons, here is a breakdown of the cost…
-
Are There Hidden Costs when Choosing a Helical Pier Estimate with a Depth Clause?
Read More »: Are There Hidden Costs when Choosing a Helical Pier Estimate with a Depth Clause?Yes, choosing a helical pier estimate with a depth clause can lead to additional costs beyond the initial quote. A depth clause is a standard contract provision that allows for price adjustments if piers must be installed deeper than originally…
