It is quite common to notice cracks in drywall and masonry during the first few years of a new home. Most of these occurrences are simply the result of materials drying, expanding, and contracting as the house acclimates to its environment, and they rarely signal a structural problem.
There are three main reasons these cracks appear:
- Drying Shrinkage: This is the most frequent cause. As lumber and drywall compound lose moisture and cure, hairline separations naturally form at seams, corners, and door frames.
- Thermal Expansion and Contraction: Seasonal temperature changes cause framing, drywall, and masonry to expand in the summer and shrink in the winter, which pulls at the joints.
- Minor Foundation Settlement: As the soil beneath your new home compresses slightly under the weight of the structure, minor movement can occur. This typically results in cosmetic hairline fissures or nail pops.
While some movement is a normal part of new construction—especially in the expansive clay soils common in the Centennial area—certain patterns warrant a closer look. You should monitor for stair-step cracks in brick or block veneer that follow mortar joints in a zigzag pattern, or cracks that exceed 1/4 inch in width. If you notice these alongside sticking doors or uneven floors, the underlying movement may be structural rather than cosmetic.
We recommend documenting any new cracks with photos and monitoring them for at least two seasons. If you notice cracks widening or moving progressively, we can provide a thorough assessment to determine if deeper stabilization is needed. Let us help you get your project started by scheduling a consultation to evaluate your home’s specific conditions.
Please consult a licensed contractor for definitive advice; verify licensure with the Colorado Department of Regulatory Agencies (DORA). Project outcomes and timelines may vary based on site conditions.
Related FAQs
-
What is the Best Waterproof Flooring for a Walk-in Shower Conversion?
Read More »: What is the Best Waterproof Flooring for a Walk-in Shower Conversion?When planning a walk-in shower conversion, choosing the right waterproof flooring involves balancing durability, water resistance, and maintenance needs. According to ACN Construction, the three best options are: It is important to note that these costs are preliminary estimates based…
-
Does the Weight of my Home Determine whether Push Piers or Helical Piers are the More Cost-effective Repair Solution?
Read More »: Does the Weight of my Home Determine whether Push Piers or Helical Piers are the More Cost-effective Repair Solution?Yes, the weight of your home is a major factor in determining whether steel push piers or helical piers are more cost-effective for your specific project. At ACN Construction, we assess structural load carefully because different pier systems react differently…
-
Do Walk-in Showers Increase Home Resale Value?
Read More »: Do Walk-in Showers Increase Home Resale Value?Yes, walk-in showers significantly increase home resale value by making bathrooms appear larger and more modern, which is a key selling point in competitive markets. According to the provided content, the return on investment (ROI) for these renovations is strong:…
-
How does the Required Installation Depth Affect the Total Cost per Helical Pier?
Read More »: How does the Required Installation Depth Affect the Total Cost per Helical Pier?The installation depth is a primary driver of the total cost per helical pier because the relationship between depth and expense is directly proportional. As the depth increases, the cost rises due to several specific factors: Because soil conditions vary—even…
-
How Much does a New Garage Door Cost with Installation in Denver?
Read More »: How Much does a New Garage Door Cost with Installation in Denver?ACN Construction provides garage door installation services in Denver using a custom-quote pricing model. The provided text does not list specific flat-rate prices or a general cost range because project totals depend on several variables identified during a site inspection.…
