It is quite common to notice cracks in drywall and masonry during the first few years of a new home. Most of these occurrences are simply the result of materials drying, expanding, and contracting as the house acclimates to its environment, and they rarely signal a structural problem.
There are three main reasons these cracks appear:
- Drying Shrinkage: This is the most frequent cause. As lumber and drywall compound lose moisture and cure, hairline separations naturally form at seams, corners, and door frames.
- Thermal Expansion and Contraction: Seasonal temperature changes cause framing, drywall, and masonry to expand in the summer and shrink in the winter, which pulls at the joints.
- Minor Foundation Settlement: As the soil beneath your new home compresses slightly under the weight of the structure, minor movement can occur. This typically results in cosmetic hairline fissures or nail pops.
While some movement is a normal part of new construction—especially in the expansive clay soils common in the Centennial area—certain patterns warrant a closer look. You should monitor for stair-step cracks in brick or block veneer that follow mortar joints in a zigzag pattern, or cracks that exceed 1/4 inch in width. If you notice these alongside sticking doors or uneven floors, the underlying movement may be structural rather than cosmetic.
We recommend documenting any new cracks with photos and monitoring them for at least two seasons. If you notice cracks widening or moving progressively, we can provide a thorough assessment to determine if deeper stabilization is needed. Let us help you get your project started by scheduling a consultation to evaluate your home’s specific conditions.
Please consult a licensed contractor for definitive advice; verify licensure with the Colorado Department of Regulatory Agencies (DORA). Project outcomes and timelines may vary based on site conditions.
Related FAQs
-
Which Colorado Jurisdictions are Required to Adopt the Mlecc by 2026?
Read More »: Which Colorado Jurisdictions are Required to Adopt the Mlecc by 2026?Based on the provided guide, several Colorado jurisdictions are scheduled to adopt or implement the Model Low Energy and Carbon Code (MLECC) by 2026. While the code establishes a statewide baseline, local adoption timelines vary. The specific jurisdictions required to…
-
What is the Colorado Model Low Energy and Carbon Code?
Read More »: What is the Colorado Model Low Energy and Carbon Code?The Model Low Energy and Carbon Code (MLECC) is an enhanced energy standard in Colorado designed to push building efficiency beyond baseline requirements. It serves as a framework for low-energy and low-carbon construction in both new homes and major renovation…
-
Does my Home Remodel in Denver Need to Comply with the 2026 Mlecc?
Read More »: Does my Home Remodel in Denver Need to Comply with the 2026 Mlecc?Yes, if you are planning a major renovation or remodel in Denver, your project will need to comply with the Model Low Energy and Carbon Code (MLECC). Denver has adopted the MLECC with a timeline that makes these standards mandatory…
-
What are the Insulation and Air Sealing Standards in the New Colorado Energy Code?
Read More »: What are the Insulation and Air Sealing Standards in the New Colorado Energy Code?The New Colorado Model Low Energy and Carbon Code (MLECC) establishes rigorous performance benchmarks for building envelopes, focusing on high-performance insulation and enhanced air sealing to move homes toward net-zero energy readiness. Insulation Standards Insulation requirements vary by jurisdiction, with…
-
How does the Mlecc Affect Residential Window Requirements after July 1, 2026?
Read More »: How does the Mlecc Affect Residential Window Requirements after July 1, 2026?Starting July 1, 2026, the Model Low Energy and Carbon Code (MLECC) significantly tightens window performance standards for residential projects across most Colorado jurisdictions. These updates focus on specific efficiency metrics to reduce carbon emissions and heat transfer. Key requirements…
