No, sticking doors and windows do not always indicate a significant problem. In a newly built home, some sticking is considered a normal part of the initial settling process as the structure acclimates to its environment, particularly during the first 12 months.
In our experience here in Colorado, this is often caused by seasonal expansion and contraction. For example, a door might stick during a wet spring due to moisture but swing freely again by late summer. Minor issues that can be resolved by adjusting a strike plate or planing the door are typically within normal construction tolerances.
However, you should be concerned if the sticking becomes permanent, progressively worsens over several months, or is accompanied by other red flags, such as:
- Stair-step cracks in masonry or brick veneer that radiate from the corners of the door or window frame.
- Changing gaps around the frames, such as a gap that is widening at the top while narrowing at the bottom.
- Cracks exceeding 1/4 inch in width, which are generally considered structurally significant.
Because Centennial and the Denver area have expansive clay soils and harsh freeze-thaw cycles, homes in our region can experience more pronounced movement. If you notice these progressive signs, it is important to have a professional evaluation to determine if the movement is harmless or requires stabilization.
Let us help you get your project started. If you are concerned about your home’s foundation, please contact us for a site evaluation and a custom quote.
Please consult a licensed contractor for definitive advice; verify licensure with the Colorado Department of Regulatory Agencies (DORA). Estimates are preliminary and subject to change after site inspection and a full scope review.
Related FAQs
-
What Factors, such as Soil Type and Pier Design, Influence Helical Pier Load Capacity?
Read More »: What Factors, such as Soil Type and Pier Design, Influence Helical Pier Load Capacity?The load capacity of a helical pier is not a fixed number; it is influenced by a combination of environmental conditions, mechanical design, and installation variables. According to the provided content, the primary factors include: Soil Conditions and Groundwater: Soil…
-
How is the Load Capacity of a Helical Pier Determined for a Residential Project?
Read More »: How is the Load Capacity of a Helical Pier Determined for a Residential Project?The load capacity of a helical pier for a residential project is determined through a multi-step process involving geotechnical analysis, engineering calculations, and on-site verification. Key methods used to determine and verify capacity include: Geotechnical Soil Analysis: Engineers evaluate soil…
-
How does the Size of the Structure and its Load Requirements Impact the Final Price per Helical Pile Unit?
Read More »: How does the Size of the Structure and its Load Requirements Impact the Final Price per Helical Pile Unit?The size of a structure and its specific load requirements are primary drivers of the final helical pile price per unit because they dictate the engineering specifications of the piles. Larger or heavier structures require more robust materials and intensive…
-
Are Helical Piles More Cost-effective than Traditional Concrete Footings when Considering Total Project Time?
Read More »: Are Helical Piles More Cost-effective than Traditional Concrete Footings when Considering Total Project Time?Yes, helical piles are generally more cost-effective than traditional concrete footings when the total project timeline and labor requirements are considered. While the initial material cost per unit may be higher for helical piles, they offer several strategic advantages that…
-
How is Individual Helical Pier Load Capacity Verified During the Installation Process?
Read More »: How is Individual Helical Pier Load Capacity Verified During the Installation Process?During the installation process, individual helical pier load capacity is verified through real-time field monitoring and standardized testing methods. The primary techniques include: Torque Correlation Method: This is the main real-time verification tool. The final installation torque (measured in foot-pounds)…
